Industrial maintenance products: free, lubricate, protect and clean
For the workshop and plant maintenance: loosening seized parts, lubricating at high temperature, protecting against rust, cleaning electrical panels and engines, mould release and lubricating conveyor belts. Fourteen products with their use exactly as stated in the technical data sheet.
Call us: +34 938 891 344
One product for each operation
Industrial maintenance combines very different operations: freeing rusted parts, lubricating joints that work under pressure and temperature, protecting metal against moisture, cleaning electrical equipment without leaving residue and engines with burnt oil.
Most of these products are 400 ml aerosols. Dielectrics are always applied with the system switched off, as their data sheet indicates, and may slightly attack some plastics.
Which product for each operation
Freeing
Seized and rusted parts
- Desbloc — liquid, 10 l
- Desbloc sp — aerosol; displaces moisture and protects against corrosion
Electrical cleaning
Dielectrics
- Electronic — fast evaporation, no subsequent drying
- Di elec — slow but complete evaporation
Engines and moulds
Degreasing and mould release
- Desgrasol MO — 1:4 emulsion that forms a foam; burnt oils
- Desmo sil — silicone release agent; also against weld spatter
For hands with grease and soot: Derbel pasta and Derbel crema. More in the professional hand hygiene guide.
Pack size and use of each product
| Product | Pack size | Use per data sheet | Data sheet figure |
|---|---|---|---|
| Desbloc | 10 l | Frees seized and rusted parts; prevents squeaking | Leave to act for a few seconds |
| Desbloc sp | 12×400 ml | Multi-purpose penetrant; displaces moisture | Compatible with greases and oils |
| Lubri Co | 12×400 ml | Pins, hinges, threaded joints, valves, bearings | −20 to 1,200 °C; resists water and steam |
| Lubri al | 12×400 ml | Pins, hinges, threaded joints, valves, bearings | −20 to 1,000 °C; resists water and steam |
| Lubri ato | 12×400 ml | Chains, gears and hard-to-reach cables | −20 to 200 °C; contains PTFE |
| Anti Ox | 12×400 ml | Protection against moisture and corrosion | Thin permanent layer that does not dry |
| Electronic | 12×400 ml | Generators, motors, transformers, electrical panels | Fast evaporation; with the system switched off |
| Di elec | 12×400 ml | Generators, motors, transformers, electrical panels | Slow evaporation; with the system switched off |
| Desgrasol MO | 20 l | Engines, gears, gearboxes, machinery | Mix 1:4 with water; 5–10 min |
| Desmo sil | 12×400 ml | Mould release for rubber and plastics; welding | Spray from about 30 cm |
| Lubrisil | 20 kg | Conveyor belts for Tetra Brik cartons | 5–20 g/l by drip feed |
| Lubri Pro | 20 kg | Packaging line belts: dairy, beverages, canning | 0.2–0.4% |
| Derbel pasta | 11 l, 4×5 l | Hands with grease, oil and soot | With solvents; neat |
| Derbel crema | 4×5 kg | Hands with grease, oil and soot | Biodegradable abrasive; neat |
Dielectrics are applied with the system switched off and may slightly attack some plastics, according to their data sheet. Clean the parts before applying a lubricant.
Who this range is for
Mechanical workshops
Desbloc, anti-seize lubricants, Desgrasol MO for engines and Derbel for hands.
Plant maintenance
Electrical panels with Electronic or Di elec; chains and gears with Lubri ato.
Beverage and dairy packaging
Lubrisil and Lubri Pro for conveyor belts.
Shipping and construction
Desbloc sp and Anti Ox include these sectors in their data sheet.
Frequently asked questions about industrial maintenance products
What should I use to free a seized part?
Desbloc or, as an aerosol, Desbloc sp: apply it directly to the part and leave it to act for a few seconds. Desbloc sp also displaces moisture and protects against corrosion.
Which lubricant withstands high temperatures?
How is an electrical panel cleaned?
With a dielectric degreaser and the system switched off: Electronic, fast-evaporating, or Di elec, slow- but fully evaporating. Spray from about 30 cm and, if necessary, help with a dry brush.
How is an engine degreased?
Desgrasol MO is mixed with water in a 1:4 ratio and sprayed: it forms a foam that clings to vertical surfaces. Leave it to act for 5–10 minutes and rinse.
Which lubricant should I use on conveyor belts?
Do you supply workshops, industry and distributors?
Yes. We have been manufacturing at our plant in Vic since 1990. See the distribution programme.
What do you need for your workshop or plant?
Tell us which operations you carry out (freeing parts, lubricating, cleaning panels or engines, conveyor belts) and your approximate consumption: we will prepare a proposal at factory price.
Request advice
Todos los campos son obligatorios excepto el mensaje.
¿Prefieres hablar directamente? +34 938 891 344