Minimum vs optimal range
The essential minimum (3 products)
Optimal range (7–8 products)
Selection criteria
- Professional formulation (not domestic)
- Low-foam, compatible with industrial machinery
- Controlled viscosity for peristaltic pumps
- Technical data sheets and SDS available
- Applicable certifications (Ecolabel, sanitary register)
- Stock planning with the supplier
What each product does in the cycle
To decide which products you need, it helps to look at them in the order in which they act. Each one has its moment and its dose, according to its technical data sheet.
- Before washing – stain remover: Q3 removes protein, carbohydrate and fat-based stains (blood, egg, sauces, grease). It is applied neat, left to act for about 5 minutes, and contact time should not exceed 15 minutes. It is not suitable for wool or leather, and colourfastness should be tested first.
- Wash – detergent: Bluegold, a concentrated enzymatic detergent, at between 5 and 10 g per kg of dry laundry depending on soiling, with a recommended temperature of around 40 °C.
- Bleaching – optional: Oximatic +, a bleach based on stabilised peracetic acid, at between 2 and 6 g per kg of dry laundry via an automatic peristaltic dosing unit. It can be used on any type of textile fibre.
- Penultimate rinse – hygiene: Sanitex, based on quaternary ammonium, at 4 g per kg of dry laundry with a minimum contact time of 5 minutes. It is neutral and non-oxidising.
- Final rinse – softener: Blue Soft, at between 5 and 10 g per kg of dry laundry; its fragrance microcapsules keep the scent for longer.
- Machine maintenance: Machine Clean, with the washer empty, at about 40 g/kg and around 60 °C for about 30 minutes, followed by a rinse.
Safe storage
- Keep each product in its original, labelled container; never decant into unidentified bottles.
- Oxidising products such as Oximatic + and Machine Clean must be protected from sunlight, stored at no more than 50 °C and kept away from sources of heat and sparks.
- Keep the safety data sheets accessible and protective equipment (gloves, eyewear) next to the storeroom.
- Do not mix products: this warning appears on every technical data sheet in the range.
How much stock to keep
Work out the weekly consumption of each product by multiplying the week's cycles by the load in kilos and by the calibrated dose. With 24–48 h delivery on the Spanish mainland, you only need enough margin to cover the restocking time and seasonal peaks, without filling up the storeroom.
Frequently asked questions
Do I need a bleach and a sanitiser from day one?
Not necessarily. The minimum range on this page covers basic operation; bleach and sanitiser are added when customers ask for them, for example if they bring a lot of white laundry or have specific hygiene requirements.
What documentation should come with each product?
A technical data sheet and a safety data sheet compliant with the REACH Regulation, with CLP labelling. Detergents must also comply with Regulation (EC) No 648/2004.
When should I carry out maintenance with Machine Clean?
The data sheet refers to periodic use: in practice, set a schedule for each machine and do it while the washer is out of service, since it is used with the drum empty. It is harmful if inhaled and may cause respiratory irritation, so ventilate the premises well and wear gloves, eye protection and protective clothing.
Which range fits your operation?
Technical visit to define the optimal mix for your customer base and volume.
B2B PRICE · MANUFACTURER
Shall we send you our detergent and softener price list?
Price per pack size for self-service laundries and recommended dosage. We will reply to your request.