Desmo sil

Silicone based nonstick releasing agent

Description

Desmo sil is an active silicone based nonstick releasing agent. It forms a thin and uniform film which avoids adherence ensuring perfect working conditions. Useful for demolding processes of rubber and plastics and also to avoid adherence of projections from welding processes. Desmo sil is also useful as a general purpose nonstick.

Dosage and use instructions

Mold release: spray lightly the interior parts of the mold at a distance of aprox. 30 cm. Leave it for a while before starting molding.
Welding: spray all the parts exposed to projections but away from the arc, especially nozzles, contact tubes (just outside), diffusers, bottom of the nozzle holder, etc. Leave it for a while before starting welding. After the treatment, a light tap is enough to make the projections fall off.

Technical data

Appearance	Aerosol.
Density (20ºC)	0.78 +/- 0.05 g/ml.

Main components

Silicone.

Presentation

12x400 ml.

Use or handling precautions

Danger UN No.: UN1950

	DO NOT SWALLOW.
H222	Extremely flammable aerosol.
H225	Highly flammable liquid and vapour.
H304	May be fatal if swallowed and enters airways.
H336	May cause drowsiness or dizziness.
H411	Toxic to aquatic life with long lasting effects.
P102	Keep out of reach of children.
P210	Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P251	Do not pierce or burn, even after use.
P301+P310	IF SWALLOWED: Immediately call a POISON CENTER or docto.
P410+P412	Protect from sunlight. Do not expose to temperatures exceeding 50ºC/122ºF.
P501b	Dispose of contents/container to hazardous or special waste collection point.
	Do not mix with other chemichals.

Consult the Safety Data Sheet (SDS) before using the product.