Adiclor - High-Active Chlorine Bleach Substitute
Effective substitute for bleach, with high active chlorine content. Its optimal performance is obtained at temperatures below 60ºC.
Dosage and use instructions
Dosage ranges from 5 and 10 g per kg of dry clothes, depending on the degree of dirt.
Technical data
Appearance: White granular solid.
pH (1%): 10.5 +/- 0.5
Chlorine content: aprox. 11%.
Main components
Contains polycarboxylates < 5 %, phosphates 5-15 %, chlorine-based bleaching agents 15-30 %, zeolites 5-15%.Troclosene sodium dihydrate.
Presentation
10 kg.
Use or handling precautions
DO NOT SWALLOW
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H411 Toxic to aquatic life with long lasting effects.
EUH031 Contact with acids liberates toxic gas.
P102 Keep out of reach of children.
P280F Wear protective gloves, clothing and eye protection. In case of inadequate ventilation wear respiratory protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical attention.
P273-P391-P501a Avoid release to the environment. Collect spillage. Dispose of contents/container in a safe way.
Warning! Do not use together with other products. May release dangerous gases (chlorine).
Review:
10
Date:
25/04/2023
Adiclor es un sustituto de la lejía en formato sólido granular con alto contenido en cloro activo (aprox. 11 %), formulado sin amoniaco, sin sosa cáustica, sin alcohol, sin perfume y sin colorantes artificiales. Indicado para el tratamiento de ropa en maquinaria de lavado profesional, con rendimiento óptimo a temperaturas inferiores a 60 °C.
Dosificar entre 5 y 10 g/kg de ropa en función del grado de suciedad. Introducir el producto directamente en el compartimento de blanqueante de la maquinaria o mediante sistema de dosificación automática. No aplicar manualmente sobre tejidos en seco. No mezclar con otros productos químicos. Rendimiento óptimo a temperaturas inferiores a 60 °C.
| Aspecto | Sólido granular blanco |
| pH (1 %) | 10,5 ± 0,5 |
| Contenido en cloro activo | Aprox. 11 % |
| Presentación | 10 kg |
| Sin | Amoniaco · sosa cáustica · alcohol · perfume · colorantes artificiales · EDTA · NTA |
NO INGERIR. No utilizar junto con otros productos. Puede desprender gases peligrosos (cloro). En contacto con ácidos libera gases tóxicos.
Para información completa de manipulación, conservación y eliminación, solicitar la Ficha de Datos de Seguridad (FDS) a Instaquim.